DS-K1TA70MI-T face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
Recognition distance: 0.5 to 1.5 m
Fast temperature measurement mode: Detects face and takes temperature without identity authentication
Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Displays temperature measurement results on the authentication page
Triggers voice prompt when detecting abnormal temperature
Configurable door status (open/close) when detecting abnormal temperature
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
6000 face capacity, 6000 card capacity, and 100,000 event capacity
Suggested height for face recognition: between 1.4 m and 1.9 m
Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
Watchdog design and tamper function
Audio prompt for authentication result
NTP, manually time synchronization, and auto synchronization
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
Imports and export data to the device from the client software
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
Specification Temperature measurement
Temperature range
30 °C to 45 °C (86 °F to 113 °F)
Sensor
Vanadium Oxide uncooled sensor
Resolution
120 × 160
Frame rate
25 fps
Accuracy
± 0.5 °C, without black body calibration
Measuring distance
0.5 to 1.5 m Screen
Size
7-inch
Type
Touch screen Camera
Pixel
2 MP
Lens
Dual-lens Network
Wired network
Support, 10/100/1000 Mbps self-adaptive Interface
Network interface
1
RS-485
1
Wiegand
1
Lock output
1
Exit button
1
Door contact input
1
TAMPER
1 Capacity
Card capacity
6000
Face capacity
6000
Event capacity
100,000 Authentication
Card type
Mifare 1 card
Card reading distance
0 to 5 cm
Card reading duration
＜ 1 s
Face recognition duration
＜ 0.2 s per person
Face recognition distance
0.5 to 1.5 m Function
Face anti-spoofing
Support
Audio prompt
Support Others
Power supply
12 VDC/2 A
Working temperature
0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
Working humidity
10 to 90% (No condensing)
Application environment
Indoor and windless environment use only
